A stable, power scaling, graphene-mode-locked all-fiber oscillator

This is the final version. Available from AIP Publishing via the DOI in this record.We report power tunability in a fiber laser mode-locked with a solution-processed filtered graphene film on a fiber connector. 370 fs pulses are generated with output power continuously tunable from 4 up to 52 mW. This is a simple, low-cost, compact, portable, all-fiber ultrafast source for applications requiring environmentally stable, portable sources, such as imaging.European Research Council (ERC)Engineering and Physical Sciences Research Council (EPSRC)Emmanuel College, CambridgeIsaac Newton Trust, Trinity College Cambridg

A stable, power scaling, graphene-mode-locked all-fiber oscillator

We report power tunability in a fiber laser mode-locked with a solution-processed filtered graphene film on a fiber connector. ∼370 fs pulses are generated with output power continuously tunable from ∼4 up to ∼52 mW. This is a simple, low-cost, compact, portable, all-fiber ultrafast source for applications requiring environmentally stable, portable sources, such as imaging.</jats:p

Publisher Correction: Graphene overcoats for ultra-high storage density magnetic media.

Publisher Correction: Graphene overcoats for ultra-high storage density magnetic media

Large-scale quantum-emitter arrays in atomically thin semiconductors

This is the final version. Available on open access from Nature Research via the DOI in this recordData availability: The data that supports the findings of this study are available from the corresponding author upon request.Quantum light emitters have been observed in atomically thin layers of transition metal dichalcogenides. However, they are found at random locations within the host material and usually in low densities, hindering experiments aiming to investigate this new class of emitters. Here, we create deterministic arrays of hundreds of quantum emitters in tungsten diselenide and tungsten disulphide monolayers, emitting across a range of wavelengths in the visible spectrum (610–680 nm and 740–820 nm), with a greater spectral stability than their randomly occurring counterparts. This is achieved by depositing monolayers onto silica substrates nanopatterned with arrays of 150-nm-diameter pillars ranging from 60 to 190 nm in height. The nanopillars create localized deformations in the material resulting in the quantum confinement of excitons. Our method may enable the placement of emitters in photonic structures such as optical waveguides in a scalable way, where precise and accurate positioning is paramount.European CommissionEuropean Research Council (ERC)Engineering and Physical Sciences Research Council (EPSRC)National Science Foundation (NSF

Atomically thin quantum light-emitting diodes

Transition metal dichalcogenides are optically active, layered materials promising for fast optoelectronics and on-chip photonics. We demonstrate electrically driven single-photon emission from localized sites in tungsten diselenide and tungsten disulphide. To achieve this, we fabricate a light-emitting diode structure comprising single-layer graphene, thin hexagonal boron nitride and transition metal dichalcogenide mono- and bi-layers. Photon correlation measurements are used to confirm the single-photon nature of the spectrally sharp emission. These results present the transition metal dichalcogenide family as a platform for hybrid, broadband, atomically precise quantum photonics devices.European Research Council (Grant ID: PHOENICS), Engineering and Physical Sciences Research Council (Grant ID: EP/N010345/1

Atomically thin quantum light-emitting diodes

This is the final version. Available on open access from Nature Research via the DOI in this recordData availability: The data that support the findings of this study are available from the corresponding authors upon request.Transition metal dichalcogenides are optically active, layered materials promising for fast optoelectronics and on-chip photonics. We demonstrate electrically driven single-photon emission from localized sites in tungsten diselenide and tungsten disulphide. To achieve this, we fabricate a light-emitting diode structure comprising single-layer graphene, thin hexagonal boron nitride and transition metal dichalcogenide mono- and bi-layers. Photon correlation measurements are used to confirm the single-photon nature of the spectrally sharp emission. These results present the transition metal dichalcogenide family as a platform for hybrid, broadband, atomically precise quantum photonics devices.European UnionEuropean Research Council (ERC)Engineering and Physical Sciences Research Council (EPSRC

p-wave triggered superconductivity in single-layer graphene on an electron-doped oxide superconductor

Electron pairing in the vast majority of superconductors follows the Bardeen-Cooper-Schrieffer theory of superconductivity, which describes the condensation of electrons into pairs with antiparallel spins in a singlet state with an s-wave symmetry. Unconventional superconductivity was predicted in single-layer graphene (SLG), with the electrons pairing with a $\textit{p}$-wave or chiral d-wave symmetry, depending on the position of the Fermi energy with respect to the Dirac point. By placing SLG on an electron-doped (non-chiral) d-wave superconductor and performing local scanning tunnelling microscopy and spectroscopy, here we show evidence for a $\textit{p}$-wave triggered superconducting density of states in SLG. The realization of unconventional superconductivity in SLG offers an exciting new route for the development of p-wave superconductivity using two-dimensional materials with transition temperatures above 4.2 K.The work was funded by the following agencies: Royal Society (‘Superconducting Spintronics’), Leverhulme Trust (IN-2013-033), Schiff Foundation, the EPSRC (EP/N017242/1, EP/G037221/1, EP/K01711X/1, EP/K017144/1, EP/N010345/1, EP/M507799/1, EP/L016087/1), ERC Grant Hetero2D, EU Graphene Flagship, COST Action MP-1201, MSCA-IFEF-ST No. 656485-Spin3, Outstanding Academic Fellows programme at NTNU, Research Council of Norway (205591, 216700 and 24080)

p-wave triggered superconductivity in single-layer graphene on an electron-doped oxide superconductor

This is the final version. Available on open access from Nature Research via the DOI in this record.Data availability: The data set generated and analysed during this study are available for access at http://dx.doi.org/10.17863/CAM.6228Electron pairing in the vast majority of superconductors follows the Bardeen–Cooper–Schrieffer theory of superconductivity, which describes the condensation of electrons into pairs with antiparallel spins in a singlet state with an s-wave symmetry. Unconventional superconductivity was predicted in single-layer graphene (SLG), with the electrons pairing with a p-wave or chiral d-wave symmetry, depending on the position of the Fermi energy with respect to the Dirac point. By placing SLG on an electron-doped (non-chiral) d-wave superconductor and performing local scanning tunnelling microscopy and spectroscopy, here we show evidence for a p-wave triggered superconducting density of states in SLG. The realization of unconventional superconductivity in SLG offers an exciting new route for the development of p-wave superconductivity using two-dimensional materials with transition temperatures above 4.2 K.Royal SocietyLeverhulme TrustSchiff FoundationEngineering and Physical Sciences Research Council (EPSRC

p-wave triggered superconductivity in single-layer graphene on an electron-doped oxide superconductor

Electron pairing in the vast majority of superconductors follows the Bardeen–Cooper–Schrieffer theory of superconductivity, which describes the condensation of electrons into pairs with antiparallel spins in a singlet state with an s-wave symmetry. Unconventional superconductivity was predicted in single-layer graphene (SLG), with the electrons pairing with a p-wave or chiral d-wave symmetry, depending on the position of the Fermi energy with respect to the Dirac point. By placing SLG on an electron-doped (non-chiral) d-wave superconductor and performing local scanning tunnelling microscopy and spectroscopy, here we show evidence for a p-wave triggered superconducting density of states in SLG. The realization of unconventional superconductivity in SLG offers an exciting new route for the development of p-wave superconductivity using two-dimensional materials with transition temperatures above 4.2 K

Temperature Evolution in Nanoscale Carbon-Based Memory Devices Due to Local Joule Heating

© 2002-2012 IEEE. Tetrahedral amorphous (ta-C) carbon-based memory devices have recently gained traction due to their good scalability and promising properties like nanosecond switching speeds. However, cycling endurance is still a key challenge. In this paper, we present a model that takes local fluctuations in sp 2 and sp 3 content into account when describing the conductivity of ta-C memory devices. We present a detailed study of the conductivity of ta-C memory devices ranging from ohmic behavior at low electric fields to dielectric breakdown. The study consists of pulsed switching experiments and device-scale simulations, which allows us for the first time to provide insights into the local temperature distribution at the onset of memory switching